Today the temperature never rose higher than 39 degrees Fahrenheit at my house in Vermont, and we saw snow on the upper ski slopes of Pico Mountain. Word just came in that Killington opens tomorrow for skiing! Tonight we expect our first frost of the season, even though we're still experiencing the peak foliage of mid-October.
The night-time temperatures have been chilly enough to cause the heat in our house to kick over for the past couple of weeks and I've had the heat on in my car a bunch of times. Already I'm noticing that my hands are drying out and my cuticles are hardening and cracking.
For those of us who work with silk thread when knotting pearls, dry hands can be a big problem. The dried up cuticles and skin can catch on the thread and damage it while we're working. This is also a problem for anyone who handles yarns, threads, and delicate fabrics. In addition, for those who do scrapbooking or work in offices, paper can suck the moisture out of your hands, not to mention the paper cuts that can also catch on and shred your silk thread.
I've already started to use hand lotion a couple of times during the day and always before I go to bed at night, because it's easier to keep the skin from drying out than it is to fix it once it has been damaged. But that's probably not a surprise to anyone.
There are two problems that I think many of us miss.
First, going outside in the cold without gloves or mittens can be very drying to your hands. We usually think of the heat as the culprit, but cold can do damage, too, especially when there is wind. I don't even want to mention the winter F-word (frostbite).
Second, driving your car can dry your hands out! Why? Because when we turn on our car heaters, we often aim the hot airstream straight at our hands to keep them warm as they grip that cold steering wheel. Even when we divert the airstream away from our hands, we're in a confined space with the heater running—meaning that passengers are also getting dried out hands.
The solution is the same in both cases. Wear gloves or mittens when you go outside and when you're in the car. Even better, apply hand lotion under the gloves and mittens. When going outside, be careful to use hand lotion that has little to no water content because the water can freeze and damage your skin—yes, I'm aware of the concept of using hand lotion to trap the moisture into your skin, but not when you're outside in below-freezing temperatures. Avoid using face lotion with water when you're outside in the winter, too. Ask me about the time I went skiing with the wrong lotion on my face. The next day I had quarter-sized, dry, red splotches all over my face. It wasn't pretty and it hurt.
I know that fingerless gloves and fingerless mittens are popular, but they leave those fingertips and cuticles exposed. I've decided that I'm going to wear my fingerless gloves over my driving gloves.
I'm hoping that if I'm careful to protect my cuticles from dryness then my nails won't dry up and crumble again this winter. Maybe I'm expecting too much. Time will tell.
So, what can you do if you've already got parched hands and cuticles and they're catching on your thread/yarn/fabric? Gently smooth the rough cuticles with a fine emery board. Don't scrub. Then apply a grease-free hand lotion so that you don't stain your work.
Save the vaseline and other greasy lotions for bedtime—and wear cotton gloves to keep the lotion on your skin and away from everything else.
Showing posts with label pearl knotting. Show all posts
Showing posts with label pearl knotting. Show all posts
Friday, October 12, 2012
Sunday, June 3, 2012
TIPS ON HAND-KNOTTED PEARL NECKLACES, PART 2
Last June I wrote a blog post called "Tips on Hand-Knotted Pearl Necklaces, Part 1." If you missed that post you can read it here.
I've been meaning to write a follow-up to that post ever since then, but for some reason I just couldn't get motivated. It struck me as quite a coincidence that I'm inspired to write about pearls again in June. Maybe it's because the pearl is the traditional birthstone for the month of June. I think I'm getting a little Heavenly nudge from my mother, whose birthday would have been on June 14. I'm sure that I inherited my love of pearls from her.
I've been thinking about some things that I didn't write about pearls in last year's post, as well as some new things that I've learned. I thought they were worth discussing.
WHY SILK?
As I explained in Part 1, it is traditional to string pearls with silk thread. Silk gives the knotted strand a lovely drape and the silk has a soft sheen that goes so beautifully with the luster of the pearls. There are two main reasons that the thread is knotted in between the pearls. The first is to protect the nacre from wear, especially around the drilled holes, and the second is to keep the pearls from being lost if the necklace is broken. With knots around every pearl, only one pearl can fall off if the necklace breaks.
A few years ago I had just restrung the pearl necklace that my mother gave me. The next time I wore the necklace I leaned over to pick something up from the floor. I didn't notice that the necklace caught on the wooden arm of the chair next to me as I stood up. The necklace broke. Because it was knotted, I only had to find the one pearl that fell to the floor. The rest were intact on the necklace. I was frustrated that I had broken it immediately after restringing it, but it was a relief to know that I could fix it myself. Two restringings would have been expensive!
Speaking of restringing, your pearl necklace should be restrung on a regular basis. The thread will get dirty, no matter how careful you are to apply makeup, perfume, and hairspray before you put it on. Even if you don't wear cosmetics, your perspiration and body oils take a toll on the thread. Ironically, your body oils are good for the pearls, helping to keep them from drying out. If you wear your pearls daily you might need to restring as often as twice a year! Restringing every three years is probably enough for most of us.
Of course, there are other reasons for knotting between pearls. One is that the silk knots make the necklace look beautiful and rich.
Some of us like to hand-knot beads other than pearls. Gemstones can be enhanced with a complimentary color of silk thread knotted between them. Of course, if the gemstones are expensive, the knots will protect the beads from wear and loss, just as they protect pearls.
PEARLS HAVE SMALL HOLES
The holes that are drilled into pearls are quite small in comparison to other beads. Very small pearls have very small holes. Larger pearls have only slightly larger holes. Because the weight of the pearl is one of the factors used to determine its value, the smaller the portion of the pearl that is drilled out to make the hole, the better for the jeweler who drills and sells it.
It is possible to find large-hole pearls from a few vendors. You won't want larger holes for knotting, though. Large-hole pearls are predominantly for other styles of jewelry.
There is no standard for the size hole that is drilled in a particular size of pearl. Those of us who do a lot of pearl knotting keep several sizes of thread on hand.
SILK THREAD ON A SPOOL
One way to buy silk thread is on spools. In the U.S. that used to mean Gudebrod Champion thread. Gudebrod stopped making silk thread a couple of years ago, so that brand of silk thread is hard to find these days. A couple of other companies have started to make silk thread on a spool. I'll list the ones I know of at the end of this section.
Typically, silk thread on a spool is sized 00, 0, A, B, C, D, E, F, FF, FFF. Size 00 is the finest and Size FFF is the thickest. A big benefit to buying silk thread on a spool is that you get a lot of it, usually for under $10 per spool for the finer sizes and under $15 for the thicker sizes. The information I found showed that spools can hold anywhere from 90 to 700 yards, with the finer sizes holding the greater yardage. Getting that much thread is a big benefit if you'll be knotting pearl necklaces on a regular basis.
Spooled silk thread comes in a large variety of colors. No matter where you buy your silk thread on a spool, you'll usually find that Black, White, and Ivory come in all sizes. However, colors like Royal Blue are less likely to be used on pearls and more likely to be used on gemstones, which have larger holes. Don't be surprised to find that Royal Blue only comes in the thicker sizes, such as E, F, FF, and FFF. Silk thread comes in dye lots, just like yarn—but if you've bought a whole spool of a color, it should last a long time.
You must measure and cut silk thread that comes on a spool and then put it on a collapsible-eye needle. That means that you're using doubled thread, which is my favorite way to make knots.
Silk thread will stretch, so it's wise to pre-stretch it before knotting your necklace. See Part 1 for instructions on the way I stretch my thread.
UPDATE May 22, 2022: It is getting to be harder and harder to find spooled silk thread. I used to have 2 links here, but they no longer work.
I've been meaning to write a follow-up to that post ever since then, but for some reason I just couldn't get motivated. It struck me as quite a coincidence that I'm inspired to write about pearls again in June. Maybe it's because the pearl is the traditional birthstone for the month of June. I think I'm getting a little Heavenly nudge from my mother, whose birthday would have been on June 14. I'm sure that I inherited my love of pearls from her.
I've been thinking about some things that I didn't write about pearls in last year's post, as well as some new things that I've learned. I thought they were worth discussing.
- Why silk?
- Pearls have small holes.
- Silk thread on a spool.
- Silk cord on a card.
- Comparing thread and cord sizes.
WHY SILK?
As I explained in Part 1, it is traditional to string pearls with silk thread. Silk gives the knotted strand a lovely drape and the silk has a soft sheen that goes so beautifully with the luster of the pearls. There are two main reasons that the thread is knotted in between the pearls. The first is to protect the nacre from wear, especially around the drilled holes, and the second is to keep the pearls from being lost if the necklace is broken. With knots around every pearl, only one pearl can fall off if the necklace breaks.
A few years ago I had just restrung the pearl necklace that my mother gave me. The next time I wore the necklace I leaned over to pick something up from the floor. I didn't notice that the necklace caught on the wooden arm of the chair next to me as I stood up. The necklace broke. Because it was knotted, I only had to find the one pearl that fell to the floor. The rest were intact on the necklace. I was frustrated that I had broken it immediately after restringing it, but it was a relief to know that I could fix it myself. Two restringings would have been expensive!
Speaking of restringing, your pearl necklace should be restrung on a regular basis. The thread will get dirty, no matter how careful you are to apply makeup, perfume, and hairspray before you put it on. Even if you don't wear cosmetics, your perspiration and body oils take a toll on the thread. Ironically, your body oils are good for the pearls, helping to keep them from drying out. If you wear your pearls daily you might need to restring as often as twice a year! Restringing every three years is probably enough for most of us.
Of course, there are other reasons for knotting between pearls. One is that the silk knots make the necklace look beautiful and rich.
Some of us like to hand-knot beads other than pearls. Gemstones can be enhanced with a complimentary color of silk thread knotted between them. Of course, if the gemstones are expensive, the knots will protect the beads from wear and loss, just as they protect pearls.
PEARLS HAVE SMALL HOLES
The holes that are drilled into pearls are quite small in comparison to other beads. Very small pearls have very small holes. Larger pearls have only slightly larger holes. Because the weight of the pearl is one of the factors used to determine its value, the smaller the portion of the pearl that is drilled out to make the hole, the better for the jeweler who drills and sells it.
It is possible to find large-hole pearls from a few vendors. You won't want larger holes for knotting, though. Large-hole pearls are predominantly for other styles of jewelry.
There is no standard for the size hole that is drilled in a particular size of pearl. Those of us who do a lot of pearl knotting keep several sizes of thread on hand.
SILK THREAD ON A SPOOL
One way to buy silk thread is on spools. In the U.S. that used to mean Gudebrod Champion thread. Gudebrod stopped making silk thread a couple of years ago, so that brand of silk thread is hard to find these days. A couple of other companies have started to make silk thread on a spool. I'll list the ones I know of at the end of this section.
Typically, silk thread on a spool is sized 00, 0, A, B, C, D, E, F, FF, FFF. Size 00 is the finest and Size FFF is the thickest. A big benefit to buying silk thread on a spool is that you get a lot of it, usually for under $10 per spool for the finer sizes and under $15 for the thicker sizes. The information I found showed that spools can hold anywhere from 90 to 700 yards, with the finer sizes holding the greater yardage. Getting that much thread is a big benefit if you'll be knotting pearl necklaces on a regular basis.
![]() |
| These are two spools of Gudebrod Champion silk thread. Notice how much finer the Size C is than the Size FF. The C thread is white and the FF thread is ivory. |
Spooled silk thread comes in a large variety of colors. No matter where you buy your silk thread on a spool, you'll usually find that Black, White, and Ivory come in all sizes. However, colors like Royal Blue are less likely to be used on pearls and more likely to be used on gemstones, which have larger holes. Don't be surprised to find that Royal Blue only comes in the thicker sizes, such as E, F, FF, and FFF. Silk thread comes in dye lots, just like yarn—but if you've bought a whole spool of a color, it should last a long time.
You must measure and cut silk thread that comes on a spool and then put it on a collapsible-eye needle. That means that you're using doubled thread, which is my favorite way to make knots.
Silk thread will stretch, so it's wise to pre-stretch it before knotting your necklace. See Part 1 for instructions on the way I stretch my thread.
UPDATE May 22, 2022: It is getting to be harder and harder to find spooled silk thread. I used to have 2 links here, but they no longer work.
Fire Mountain Gems sells "Purely Silk" thread on spools and in 28 yard lengths. They are sized with letters, which is how you can tell it's thread. Be careful of the 2 yard lengths, sized with numbers, as those are corded silk with an attached needle.
https://www.firemountaingems.com/shop/purely_silk-silk-thread
Amazon sells "Simply Silk" in actual spools and seems to have a good variety of sizes in whites and off-whites. You'll need to do a search there to find what you need. I searched for white, Size E and this was the result:
Simply Beads USA sells silk thread in 28 yard (25.6 m) lengths, but you might not find the color or size you need.
https://www.simplybeadsusa.com/category-s/1891.htm
SILK CORD ON A CARD
The other way to purchase silk is in the form of silk cord on a card. It has a bit more texture than the silk on a spool. "Carded silk" comes in a single strand, already attached to a needle. It is sized from 0 through 8, with 8 being the thickest. The Griffin brand is sold in 2 meters (6.5 feet) lengths of silk cord on a card.
Just like silk thread, silk cord comes in dye lots. There may be times when you should buy an extra card or two of a specific color, just in case. For example, you've knotted a 3-strand necklace, something happens to one of the strands, and you need to restring it—but you can't find the same dye lot and the color difference is obvious. That means you'll have to restring all three strands.
With Griffin carded silk you don't have to measure your thread, but that can sometimes be a negative when you're limited to the 2 meters of thread on the card. Because a needle was attached before the filaments of silk were twisted, there is no need to add a needle and it is used as a single thread. Don't cut the thread until you've finished your necklace and you won't accidentally cut the wrong end and cut off the needle.
This thread must also be stretched and is typically done by yanking on small sections at at time, a method I don't really care for.
Carded silk used to be made primarily by Griffin, but there are more sources these days.
SILK CORD ON A CARD
The other way to purchase silk is in the form of silk cord on a card. It has a bit more texture than the silk on a spool. "Carded silk" comes in a single strand, already attached to a needle. It is sized from 0 through 8, with 8 being the thickest. The Griffin brand is sold in 2 meters (6.5 feet) lengths of silk cord on a card.
Just like silk thread, silk cord comes in dye lots. There may be times when you should buy an extra card or two of a specific color, just in case. For example, you've knotted a 3-strand necklace, something happens to one of the strands, and you need to restring it—but you can't find the same dye lot and the color difference is obvious. That means you'll have to restring all three strands.
With Griffin carded silk you don't have to measure your thread, but that can sometimes be a negative when you're limited to the 2 meters of thread on the card. Because a needle was attached before the filaments of silk were twisted, there is no need to add a needle and it is used as a single thread. Don't cut the thread until you've finished your necklace and you won't accidentally cut the wrong end and cut off the needle.
This thread must also be stretched and is typically done by yanking on small sections at at time, a method I don't really care for.
Carded silk used to be made primarily by Griffin, but there are more sources these days.
As of May 2022, the following sites sell corded silk:
Fire Mountain Gems sells the Griffin carded silk cord, sized with numbers, with attached needle. They also sell the Purely Silk brand on cards in both cord and thread. The thread will have about 28 yards, while the cord is usually 2 yards. The cord will have an attached needle. If you look closely, you can see the texture in the corded thread photos.
https://www.diybeads.com/100-griffin-silk-cord.html
https://artbeads.com/silk-bead-thread/
SPOOLED THREAD & CARDED THREAD COMPARISON CHART
I'm used to the lettered sizing system of the spooled silk thread and I get a bit confused if I have to buy carded silk. I finally made a comparison chart of the two types of thread so that I can make substitutions without going nuts. My chart supplies the diameters of each thread in millimeters so that you can see why the substitutions work. Unfortunately, I'm unable to figure out a way to copy a multiple-column table to Blogger, so this is the best I can do.
Spool = Card
00 = none
0 = 0
A = 1
B = 2
C = 3
D = 4
E = 5
F = 6
FF = 7
FFF = 8
Please note that these are not exact conversions, but simply the closest diameters. Also, when you use spooled thread, it is doubled, while thread from a card is used as a single strand. So when I say that Size B spooled thread is comparable to Size 2 carded cord, what I mean is that two strands of Size B thread are similar in diameter to 1 strand of Size 2 cord.
The next thing I want to talk about is measuring thread and knotting techniques with a single strand of cord vs. double strands of thread, but I think this post is long enough.
Look for the third and final post on pearls here: "Tips on Hand-Knotted Pearl Necklaces, Part 3."
© Copyright 2012 Linda's Art Barn. All rights reserved.
SPOOLED THREAD & CARDED THREAD COMPARISON CHART
I'm used to the lettered sizing system of the spooled silk thread and I get a bit confused if I have to buy carded silk. I finally made a comparison chart of the two types of thread so that I can make substitutions without going nuts. My chart supplies the diameters of each thread in millimeters so that you can see why the substitutions work. Unfortunately, I'm unable to figure out a way to copy a multiple-column table to Blogger, so this is the best I can do.
Spool = Card
00 = none
0 = 0
A = 1
B = 2
C = 3
D = 4
E = 5
F = 6
FF = 7
FFF = 8
Please note that these are not exact conversions, but simply the closest diameters. Also, when you use spooled thread, it is doubled, while thread from a card is used as a single strand. So when I say that Size B spooled thread is comparable to Size 2 carded cord, what I mean is that two strands of Size B thread are similar in diameter to 1 strand of Size 2 cord.
The next thing I want to talk about is measuring thread and knotting techniques with a single strand of cord vs. double strands of thread, but I think this post is long enough.
Look for the third and final post on pearls here: "Tips on Hand-Knotted Pearl Necklaces, Part 3."
© Copyright 2012 Linda's Art Barn. All rights reserved.
Subscribe to:
Posts (Atom)



